Hill Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

576th Aircraft Maintenance Squadron paint shop

An F-16 Fighting Falcon that 576th Aircraft Maintenance Squadron paint shop technicians painted with a “ghost” paint scheme nears completion at Hill Air Force Base, Utah, May 21, 2020. The paint scheme is intended to replicate an adversary’s fighter jet. United States, allied, and partner-nation aircrews routinely train against accurate and realistic threats including aircraft painted to replicate those pilots might see in aerial combat. (U.S. Air Force photo by Donovan Potter)

Details Download

576th Aircraft Maintenance Squadron paint shop

576th Aircraft Maintenance Squadron paint shop technicians, Ben Gifford (left) and Jayson Chavez remove protective coverings from an F-16 Fighting Falcon they helped paint with a “ghost” paint scheme at Hill Air Force Base, Utah, May 21, 2020. The paint scheme is intended to replicate an adversary’s fighter jet. United States, allied, and partner-nation aircrews routinely train against accurate and realistic threats including aircraft painted to replicate those pilots might see in aerial combat. (U.S. Air Force photo by Donovan Potter)

Details Download

Hill AFB spouse receives ‘The 2020 Best of Davis Award’

"The 2020 Best of Davis Award" is awarded to Kendra Dominguez by the Davis County School District at her home at Hill Air Force Base, Utah, May 20, 2020. Dominguez is currently a special education teacher at Sunset Elementary School and serves on several education committees in the school district. The award is given annually to teachers and support staff who exemplify excellence. (Courtesy photo)

Details Download

200428-F-EI321-0124

582 Missile Maintenance Squadron liquid engine rocket fuel mechanic, Rodney Glover, inspects an AGM-86B Air Launched Cruise Missile while it is being refueled on Apr. 28, 2020, at Hill Air Force Base, Utah. All AGM-86B ALCMs received at the depot for maintenance/inspection/testing are defueled following incoming Level I testing of the missile and re-fueled prior to the outgoing Level I test. The AGM-86B is the “Air Launched Leg” of the Nuclear Triad. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200428-F-EI321-0104

582 Missile Maintenance Squadron liquid engine rocket fuel mechanics, Kevin O’Donnell (left) and Jennifer McClellan, maintain their social distance while placing an F-107 turbofan engine into a shipping container on Apr. 28, 2020, at Hill Air Force Base, Utah. The small engine is capable of producing 600 lbs. of thrust and is used in an AGM-86B Air Launched Cruise Missile. The engines are removed during MMXG depot maintenance and analytical condition inspections of the ALCM and are shipped to the Oklahoma Air Logistics Complex, Tinker Air Force Base, Oklahoma for refurbishment. The AGM-86B is the “Air Launched Leg” of the Nuclear Triad. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200428-F-EI321-0120

582 Missile Maintenance Squadron liquid engine rocket fuel mechanic, Leroy Fulton, watches over the controls while refueling an AGM-86B Air Launched Cruise Missile on Apr. 28, 2020, at Hill Air Force Base, Utah. All AGM-86B ALCMs received at the depot for maintenance/inspection/testing are defueled following incoming Level I testing of the missile and re-fueled prior to the outgoing Level I test. The AGM-86B is the “Air Launched Leg” of the Nuclear Triad. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200428-F-EI321-0013

Shadd Straw and Garrett Kippen (left to right), 581 Missile Maintenance Squadron powered support system mechanics, wear their protective face coverings while they work to connect hydraulic lines from a test stand to a loading mechanism on Apr. 28, 2020, at Hill Air Force Base, Utah. When in use, the loading mechanism is attached to a 24-inch blast valve used to protect launch crews at missile launch centers. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200428-F-EI321-0048

Clint Struchen, 581 Missile Maintenance Squadron powered support system mechanic, applies thread lubricant to the end of a launch control center shock isolator on Apr. 28, 2020, at Hill Air Force Base, Utah. Each LCC has four isolators used to support the floor where missile launch control personnel perform their duties. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200428-F-EI321-0070

582 Missile Maintenance Squadron liquid engine rocket fuel mechanics, Jennifer McClellan (left) and Kevin O’Donnell, maintain their social distance while preparing an F-107 turbofan engine for placement into a shipping container on Apr. 28, 2020, at Hill Air Force Base, Utah. The small engine is capable of producing 600 lbs. of thrust and is used in an AGM-86B Air Launched Cruise Missile. The engines are removed during MMXG depot maintenance and analytical condition inspections of the ALCM and are shipped to the Oklahoma Air Logistics Complex, Tinker Air Force Base, Oklahoma for refurbishment. The AGM-86B is the “Air Launched Leg” of the Nuclear Triad. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200428-F-EI321-0005

Skylar Cleveland, 581 Missile Maintenance Squadron powered support system mechanic, checks test results while performing a 4-hour run test during periodic depot maintenance on a shock isolator air compressor on Apr. 28, 2020, at Hill Air Force Base, Utah. The compressed air it generates is used in shock isolators at Minuteman III launch control centers located around the country. (U.S. Air Force photo by Alex R. Lloyd)

Details Download

200508-F-OD616-0001

309th Aircraft Maintenance Group crew members perform depot maintenance on a C-130 at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0008

John Blessant, 309th Aircraft Maintenance Group electrician, installs a wiring harness on an F-16 wing at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 air frames. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0009

Juan Gutierrez, left, and Jeff Schmitt, 309th Aircraft Maintenance Group sheet metal mechanics, work on an F-16 at Hill Air Force Base, Utah, May, 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0005

Shannon Ballenger, 309th Aircraft Maintenance Group aircraft mechanic, inspects an assembly on a C-130 wing at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0006

309th Aircraft Maintenance Group crew members perform depot maintenance on a C-130 at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0007

Jared Chidester, 309th Aircraft Maintenance Group aircraft mechanic, works on a C-130 at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0003

Joe Reyes, 309th Aircraft Maintenance Group sheet metal mechanic, reams a fastener hole on a C-130 wing at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0004

309th Aircraft Maintenance Group crew members perform depot maintenance on a C-130 at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200508-F-OD616-0002

Jon Pena, 309th Aircraft Maintenance Group pneudraulic systems mechanic, removes a panel from a C-130 wing at Hill Air Force Base, Utah, May 8, 2020. Comprised of seven maintenance squadrons and more than 2,000 personnel, the 309th AMXG performs depot maintenance, repair and overhaul on A-10, C-130, F-16, F-22, F-35 and T-38 airframes. (U.S. Air Force photo by R. Nial Bradshaw)

Details Download

200514-F-LS255-0007

(Left to right) Senior Master Sgt. James Thompson, 75th Security Forces Squadron operations superintendent, Capt. Benjamin Doerfler, 75th SFS operations officer, Staff Sgt. Jolly, 75th SFS police services, and Lt. Col. Michael Twining, 75th SFS commander, during a memorial ruck march May 15, 2020, at Hill Air Force Base, Utah. Defenders participated in a memorial ruck march to commemorate National Police Week, a long standing tradition that honors law enforcement officers who have paid the ultimate sacrifice. (U.S. Air Force photo by Todd Cromar)

Details Download